#
Computational fluid dynamics
Resource Information
The concept ** Computational fluid dynamics** represents the subject, aboutness, idea or notion of resources found in **Houston Public Library**.

The Resource
Computational fluid dynamics
Resource Information

The concept

**Computational fluid dynamics**represents the subject, aboutness, idea or notion of resources found in**Houston Public Library**.- Label
- Computational fluid dynamics

- Source
- nasat

## Context

Context of Computational fluid dynamics#### Subject of

- "HPTAM", a two-dimensional heat pipe transient analysis model, including the startup from a frozen state : final report no. UNM-ISNPS-4-1995
- 1998 NASA High-Speed Research Program Aerodynamic Performance Workshop : proceedings of a workshop sponsored by the National Aeronautics and Space Administration, Washington D.C., and held in Los Angeles, California, February 9-13, 1998
- 1999 NASA High-Speed Research Program Aerodynamic Performance Workshop : proceedings of a workshop ... held in Anaheim, California, February 8-12, 1999
- 3-D unstructured method for flows past bodies in 6-DOF relative motion : preprint from proceedings of 6th International Symposium of Computational Fluid Dynamics, Japan Society of Computational Fluid Dynamics, September 4-8, 1995, Lake Tahoe, Nevada
- 3D Navier-Stokes analysis of a Mach 2.68 bifurcated rectangular mixed-compression inlet
- A CFD analysis of hydrogen leakage during on-pad purge in the ORION/ARES I shared volume
- A CFD study of complex missile and store configurations in relative motion : final report for the period ended September 30, 1994
- A CFD study of tilt rotor flowfields
- A CFD-based study of the feasibility of adapting an erosion burner rig for examining the effect of CMAS deposition/corrosion on environmental barrier coatings
- A CFD/CSD interaction methodology for aircraft wings : a dissertation ...
- A Cartesian grid approach with hierarchical refinement for compressible flows
- A Cartesian, cell-based approach for adaptively-refined solutions of the Euler and Navier-Stokes equations
- A Note on singularities of the 3-D Euler equation
- A combined geometric approach for solving the Navier-Stokes equations on dynamic grids
- A comparison of computer-generated lift and drag polars for a Wortman airfoil to flight and wind tunnel results : final report
- A comparison of lifting-line and CFD methods with flight test data from a research puma helicopter
- A computational and experimental investigation of a three-dimensional hypersonic scramjet inlet flow field
- A computational examination of directional stability for smooth and chined forebodies at High-Â¿
- A computational fluid dynamic and heat transfer model for gaseous core and gas cooled space power and propulsion reactors
- A computational fluid dynamics simulation of the hypersonic flight of the Pegasus (TM) vehicle using an artificial viscosity model and a nonlinear filtering method
- A computational investigation of gear windage
- A computational methodology for simulating thermal loss testing of the Advanced Stirling C
- A computational study of multiple jet and wall interaction
- A conservative staggered-grid chebyshev multidomain method for compressible flows
- A control-volume method for analysis of unsteady thrust augmenting ejector flows
- A cost-effective strategy for nonoscillatory convection without clipping
- A coupled Eulerian/Lagrangian method for the solution of three-dimensional vortical flows
- A critical comparison of turbulence models for homogeneous shear flows in a rotating frame
- A diagonally inverted LU implicit multigrid scheme for the 3-D Navier-Stokes equations and a two equation model of turbulence
- A dual potential formulation of the Navier-Stokes equations
- A dual potential formulation of the Navier-Stokes equations : final report
- A dual-plane PIV study of turbulent heat transfer flows
- A fast parallel tridiagonal algorithm for a class of CFD applications
- A final report on NASA grant NSG 3079 entitled A linearized Euler analysis of unsteady flows in turbomachinery
- A full Navier-Stokes analysis of subsonic diffuser of a a bifurcated 70/30 supersonic inlet for high speed civil transport application
- A fully implicit time accurate method for hypersonic combustion : application to shock-induced combustion instability
- A generalized fluid system simulation program to model flow distribution in fluid networks : draft paper ...
- A generalized wall function
- A genuinely multi-dimensional upwind cell-vertex scheme for the Euler equations
- A high order discontinuous Galerkin method for 2D incompressible flows
- A high-order Lagrangian-decoupling mehod for the incompressible Navier-Stokes equations
- A high-order Lagrangian-decoupling method for the incompressible Navier-Stokes equations
- A hybrid numerical method for turbulent mixing layers
- A k-[omega] turbulence model for quasi-three-dimensional turbomacinery flows
- A knowledge-based approach to automated flow-field zoning for computational fluid dynamics
- A least-squares finite element method for electromagnetic scattering problems
- A locally implicit method for fluid flow problems : final report ... for period July 1985-July 1986
- A massively parallel computational approach to coupled thermoelastic/porous gas flow problems
- A method for flow simulation about complex geometries using both structured and unstructured grids
- A method for generating reduced order linear models of supersonic inlets : under grant NAG3-1450
- A method for generating reduced-order linear models of multidimensional supersonic inlets
- A mixed volume grid approach for the Euler and Navier-Stokes equations
- A modeling technique for STOVL ejector and volume dynamics
- A modified mixing length turbulence model for zero and adverse pressure gradients
- A new finite element approach for prediction of aerothermal loads--progress in inviscid flow computations
- A non-cut cell immersed boundary method for use in icing simulations
- A note on the wave action density of a viscous instability mode on a laminar free-shear flow
- A novel potential viscous flow coupling technique for computing helicopter flow fields
- A novel potential/viscous flow coupling technique for computing helicopter flow fields : final report
- A novel shape parameterization approach
- A numerical analysis applied to high angle of attack three-dimensional inlets
- A numerical analysis of heat transfer and effectiveness on film cooled turbine blade tip models
- A numerical and experimental analysis of reactor performance and deposition rates for CVD on monofilaments
- A numerical method for incompressible flow with heat transfer
- A numerical method for solving the three-dimensional parabolized Navier-Stokes equations
- A numerical model for dynamic wave rotor analysis
- A numerical study of the effect of wake passing on turbine blade film cooling
- A perspective on unstructured grid flow problem solvers
- A predictor-corrector scheme for vortex identification
- A robust design methodology for optimal microscale secondary flow control in compact inlet diffusers
- A sectored-one-dimensional model for simulating combustion instabilities in premix combustors
- A sectored-one-dimensional model for simulating combustion instabilities in premix combustors
- A semantic analysis method for scientific and engineering code
- A simplified self-adaptive grid method, SAGE
- A solution procedure for three-dimensional incompressible Navier-Stokes equation and its applications
- A spectral multidomain method for the solution of hyperbolic systems
- A stable penalty method for the compressible Navier-Stokes equations, I., Open boundary conditions
- A study of pump cavitation damage
- A study of the second and third order closure models of turbulence for prediction of separated shear flows
- A study of the vortex flow over 76/40-deg double-delta wing
- A three dimensional mutigrid Reynolds-averaged Navier-Stokes solver for unstructured meshes
- A three-dimensional CFD investigation of secondary flow in an accelerating, 90 ÌŠelbow
- A three-dimensional dual potential procedure with applications to wind tunnel inlets and interacting boundary layers : final report
- A three-dimensional structured/unstructured hybrid Navier-Stokes method for turbine blade rows
- A three-dimensional unsteady CFD model of compressor stability
- A two-layer multiple-time-scale turbulence model and grid independence study
- A unified multigrid solver for the Navier-Stokes equations on mixed element meshes
- A user's guide to CGNS
- A user's manual for ROTTILT solver : tiltrotor fountain flow field prediction
- A well-posed numerical method to track isolated conformal map singularities in Hele-Shaw flow
- A zonal computational procedure adapted to the optimization of two-dimensioal thrust augmentor inlets
- ADPAC v1.0 : user's manual
- AGARD fluid dynamics panel symposium on applications of computational fluid dynamics in aeronautics
- Accuracy of schemes for the Euler equations with nonuniform meshes
- Accuracy of schemes with nonuniform meshes for compressible fluid flows
- Accuracy of schemes with nonuniform meshes for compressible fluid flows
- Acoustical and flowfield characterization of a scaled tabletop rocket
- Acoustical and flowfield characterization of a scaled tabletop rocket
- Active control of flow separation over an airfoil
- Adaptive meshing techniques for viscous flow calculations on mixed element unstructured meshes
- Advanced 3-D viscous SSME turbine rotor stator CFD algorithms 6 September 85 - 5 September 86 : final report
- Advanced CFD methodology for fast transients encountered in nonlinear combustion instability problems : SBIR phase II final report (restricted circulation)
- Advanced Hypervelocity Aerophysics Facility Workshop : proceedings of a workshop sponsored by the National Aeronautics and Space Administration and held at Langley Research Center, Hampton, Virginia, May 10-11, 1988
- Advanced Subsonic Technology (AST) Area of Interest (AOI) 6 : develop and validate aeroleastic codes for turbomachinery
- Advanced multi-phase flow CFD model development for solid rocket motor flowfield analysis : final report
- Advanced space propulsion system flowfield modeling : final report : contract NAS8-40845
- Advances in numerical and applied mathematics
- Aero-heating of shallow cavities in hypersonic freestream flow
- Aerodynamic characteristics of a hypersonic research airplane concept having a 70 ÌŠswept double-delta wing at Mach numbers from 0.80 to 1.20, with summary of data from 0.20 to 6.0
- Aerodynamic characteristics of two waverider-derived hypersonic cruise configurations
- Aerodynamic design and computational analysis of a spacecraft cabin ventilation fan
- Aerodynamic design optimization on unstructured grids with a continuous adjoint formulation
- Aerodynamic design optimization with sensitivity analysis and computational fluid dynamics
- Aerodynamic design using numerical optimization
- Aerodynamic flow field measurements for automotive systems
- Aerodynamic investigation of incidence angle effects in a large scale transonic turbine cascade
- Aerodynamic investigation of incidence angle effects in a large scale transonic turbine cascade
- Aerodynamic maneuvering hypersonic flight mechanics : period of performance, June 1, 1987 - September 30, 1988
- Aerodynamic optimization studies on advanced architecture computers : final report for NASA grant NCC 2-806/
- Aerodynamic performance of a compact, high work-factor centrifugal compressor at the stage and subcomponent level
- Aerodynamic shape optimization directed toward a supersonic transport using sensitivity analysis : final report for the period ended August 15, 1995
- Aerodynamic shape optimization of wing and wing-body configurations using control theory
- Aerodynamic synthesis of a centrifugal impeller using CFD and measurements
- Aerodynamic synthesis of a centrifugal impeller using CFD and measurements
- Aeroelastic analysis of aircraft : wing and wing/fuselage configurations
- Aeroelastic calculations using CFD for a typical business jet model
- Aeroelastic computations of a compressor stage using the harmonic balance method
- Aeroelastic, CFD, and dynamics computation and optimization for buffet and flutter applications : final report for the period December 1, 1995 through Novemeber 30, 1996
- Aeromechanics analysis of a boundary layer ingesting fan
- Aeropropulsion technology (APT) : task 23--stator seal cavity flow investigation
- Algebraic turbulence modeling for unstructured and adaptive meshes
- Algorithms for parallel flow solvers on message passing architectures
- An LU implicit scheme for high speed inlet analysis
- An LU-SSOR scheme for the Euler and Navier-Stokes equations
- An NPARC turbulence module with wall functions : under cooperative agreement NCC3-370
- An accuracy assessment of Cartesian-mesh approaches for the Euler equations
- An adaptive flow solver for air-borne vehicles undergoing time-dependent motions/deformations : annual technical progress report, period--August 1, 1996 - July 31, 1997, NASA grant no.--NAG-1-1760
- An adaptive semi-implicit scheme for simulations of unsteady viscous compressible flows
- An adaptively-refined, Cartesian cell-based scheme for the Euler and Navier-Stokes equations
- An application of the difference potentials method to solving external problems in CFD
- An application of the difference potentials method to solving external problems in CFD
- An approach for dynamic grids
- An approximate Riemann solver for thermal and chemical nonequilibrium flows
- An arbitrary grid CFD algorithm for configuration aerodynamics analysis, Vol.1, Theory and validations
- An arbitrary grid CFD algorithm for configuration aerodynamics analysis, Vol.2, FEMNAS user guide
- An assessment of the adaptive unstructured tetrahedral grid, Euler flow solver code FELISA
- An assessment of viscous effects in computational simulation of benign and burst vortex flows on generic fighter wind-tunnel models using TEAM code
- An automated DAKOTA and VULCAN-CFD framework with application to supersonic facility nozzle flowpath optimization
- An axisymmetric analog two-layer convective heating procedure with application to the evaluation of space shuttle orbiter wing leading edge and windeward surface heating
- An efficient multiblock method for aerodynamic analysis and design on distributed memory systems : to be presented at the AIAA 13th Computational Fluid Dynamics Conference, June 1997
- An efficient numerical procedure for thermodydrodynamic analysis of cavitating bearings
- An efficient parallel algorithm for the simulation of three-dimensional compressible transition on a 20 processor Flex/32 multicomputer
- An experimental and numerical investigation of turbulent vortex breakdown and aircraft wakes : final report, contract NAG 1-1775
- An experimental and numerical study of icing effects on the performance and controllability of a twin engine aircraft
- An experimental low Reynolds number comparison of a Wortmann FX67-K170 airfoil, a NACA 0012 airfoil, and a NACA 64-210 airfoil in simulated heavy rain : final report to the NASA Langley Research Center on work accomplished under research grant NAG-1-568
- An experimental study of the Ground Transportation System (GTS) model in the NASA Ames 7-by-10-Ft Wind Tunnel
- An implicit, conservative, zonal-boundary scheme for Euler equation calculations
- An incremental strategy for calculating consistent discrete CFD sensitivity derivatives
- An initial investigation into methods of computing transonic aerodynamic sensitivity coefficients : semiannual progress report, July 1, 1987-December 31, 1987
- An inviscid computational study of an X-33 configuration at hypersonic speeds
- An inviscid computational study of three '07 Mars lander aeroshell configurations over a Mach number range of 2.3 to 4.5
- An upwind-differencing scheme for the incompressible Navier-Stokes equations
- Analysis and design of numerical schemes for gas dynamics 1 : artificial diffusion, upwind biasing, limiters and their effect on accuracy and multigrid convergence
- Analysis and modeling of subgrid scalar mixing using numerical data
- Analysis of a hovering rotor in icing conditions
- Analysis of a rocket based combined cycle engine during rocket only operation
- Analysis of buzz in a supersonic inlet
- Analysis of coupled seals, secondary and powerstream flow fields in aircraft and aerospace turbomachines
- Analysis of inlet-compressor acoustic interactions using coupled CFD codes
- Analysis of inlet-compressor acoustic interactions using coupled CFD codes
- Analysis of internal flows relative to the space shuttle main engine : final report
- Analysis of lean premixed/prevaporized combustion with KIVA-II
- Analysis of low-speed stall aerodynamics of a swept wing with laminar-flow glove
- Analysis of the STS-126 flow control valve structural-acoustic coupling failure
- Analysis of wavelet technology for NASA applications
- Analytical investigation of rotor wake formation and geometry : progress report for NASA grant NAG-2-275 for period April 15, 1985 - October 15, 1985
- Analytical study of the origin and behavior of asymmetric vortices
- Annual progress report ... entitled An experimental investigation of the flow physics of high-lift systems, for the period March-December 1995
- Application of CFD to aerothermal heating problems
- Application of CFD to the analysis and design of high-speed inlets : final report
- Application of Navier-Stokes code PAB3D with k-e turbulence model to attached and separated flows
- Application of a Navier-Stokes solver to the analysis of multielement airfoils and wings using multizonal grid techniques
- Application of a Runge-Kutta scheme for high-speed inviscid internal flows
- Application of a high-fidelity icing analysis method to a model-scale rotor in forward flight
- Application of an upwind high resolution finite-differencing scheme and multigrid method in steady-state incompressible flow simulations
- Application of computational fluid dynamics in high speed aeropropulsion
- Application of large-eddy interaction model to channel flow
- Application of low dimensional manifolds in NOx prediction : under cooperative agreement NCC3-534
- Application of the space-time conservation element and solution element method to two-dimensional advection-diffusion problems
- Application of unsteady aeroelastic analysis techniques on the national aerospace plane
- Applications of the Lattice Boltzmann method to complex and turbulent flows
- Ares I Scale Model Acoustic Test overpressure results
- Artificial boundary conditions based on the difference potentials method
- Assessing fan flutter stability in presence of inlet distortion using one-way and two-way coupled methods
- Assessment of NASA's aircraft noise prediction capability
- Assessment of an explicit algebraic Reynolds stress model
- Assessment of computational fluid dynamics (CFD) models for shock boundary-layer interaction
- Assessment of some atomization models used in spray calculations
- Asynchronous communication of TLNS3DMB boundary exchange
- Atomization simulations using an Eulerian-VOF-Lagrangian method
- Automated boundary conditions for wind tunnel simulations
- Axial and centrifugal compressor mean line flow analysis method
- Axial-flow turbine rotor discharge-flow overexpansion and limit-loading condition, part 1, Computational fluid dynamics (CFD) investigation
- Axisymmetric calculations of a low-boom inlet in a supersonic wind tunnel
- Beta testing of CFD code for the analysis of combustion systems
- Bidirectional brush seals : post-test analysis
- Bidirectional brush seals--post-test analysis
- Blended wing body concept development with open rotor engine integration
- Boundary conditions for jet flow computations
- Burner rig with an unattached duct for evaluating the erosion resistance of thermal barrier coatings
- CFD analysis and design optimization using parallel computers
- CFD analysis of flexible thermal protection system shear configuration testing in the LCAT facility
- CFD analysis of nozzle jet plume effects on sonic boom signature
- CFD code evaluation : semiannual report (April 1988 - September 1988)
- CFD for hypersonic propulsion
- CFD modeling of free-piston Stirling engines
- CFD modelling of bore erosion in two-stage light gas guns
- CFD research, parallel computation and aerodynamic optimization
- CFD simulations for the effect of unsteady wakes on the boundary layer of a highly loaded low-pressure turbine airfoil (L1A), final report
- CFD study of turbo-Ramjet interactions in hypersonic airbreathing propulsion system : final report : under contract NAG3-1500
- CFD validation experiment of a Mach 2.5 axisymmetric shock-wave/boundary-layer interaction
- CFL3D contribution to the AIAA Supersonic Shock Boundary Layer Interaction Workshop
- CFL3D user's manual (version 5.0)
- CFL3D, its history and some recent applications
- CMOTT turbulence module for NPARC : under cooperative agreement NCC3-520
- Calculation of multistage turbomachinery using steady characteristic boundary conditions
- Calculation of turbulence-driven secondary models in ducts with arbitrary cross section
- Calculation of viscous effects on transonic flow for oscillating airfoils and comparisons with experiment
- Calculations of diffuser flows with an anisotropic K-[epsilon] model
- Calculations of the stability of some axisymmetric flows proposed as a model of vortex breakdown
- Capillary channel flow (CCF) EU2-02 on the International Space Station (ISS) : an experimental investigation of passive bubble separations in an open capillary channel
- Cause and cure : deterioration in accuracy of CFD simulations with use of high-aspect-ratio triangular/tetrahedral grids
- Characteristics of 3D turbulent jets in crossflow
- Coarsening strategies for unstructured multigrid techniques with application to anisotropic problems
- Combined experimental and numerical simulations of thermal barrier coated turbine blades erosion
- Combining comparison functions and finite element approximations in CFD
- Combustion research for gas turbines
- Comments on the diffusive behavior of two upwind schemes
- Comments on the diffusive behavior of two upwind schemes
- Comparative results from a CFD challenge over a 2D three-element high-lift airfoil
- Comparative study of advanced turbulence models for turbomachinery : contract NAS8-38860, final report
- Comparing spray characteristics from Reynolds Averaged Navier-Stokes (RANS) National Combustion Code (NCC) calculations against experimental data for a turbulent reacting flow
- Comparison of 3-D viscous flow computations of Mach 5 inlet with experimental data
- Comparison of 3D computation and experiment for non-axisymmetric nozzles
- Comparison of NACA 0012 laminar flow solutions : structured and unstructured grid methods
- Comparison of PDF and moment closure methods in the modeling of turbulent reacting flows
- Comparison of high-order and low-order methods for large-eddy simulation of a compressible shear layer
- Comparison of numerically simulated and experimentally measured performance of a rotating detonation engine
- Comparison of several numerical methods for simulation of compressible shear layers
- Comparison of the booster interface temperature in stainless steel (SS) v-channel versus the aluminum (Al) y-channel Primer Chamber Assemblies (PCAs)
- Comparison of theoretical and flight-measured local flow aerodynamics for a low-aspect-ratio fin
- Comparison of turbulence models for nozzle-afterbody flows with propulsive jets
- Comparison of various supersonic turbine tip designs to minimize aerodynamic loss and tip heating
- Compliant turbomachine sealing
- Compressibility considerations for [kappa-omega] turbulence models in hypersonic boundary layer applications
- Compressible flows with periodic vortical disturbances around lifting airfoils
- Computation of Navier-Stokes equations for three-dimensional flow separation
- Computation of asymmetric supersonic flows around cones at large incidence : final report
- Computation of lifting wing-flap configurations : NASA grant NCC2-5070, final report ... funding dates: July 1, 1994 to June 30, 1995
- Computation of multi-dimensional viscous supersonic jet flow
- Computation of potential flows with embedded vortex rings and applications to helicopter rotor wakes
- Computation of rotor-stator interaction using Navier-Stokes equations : final report
- Computation of separated and unsteady flows with one- and two-equation turbulence models : 32nd Aerospace Sciences meeting & exhibit, January 10-13, 1994/Reno, NV
- Computation of sound generated by viscous flow over a circular cylinder
- Computation of sound generated by viscous flow over a circular cylinder
- Computation of the transonic flow about a swept wing in the presence of an engine nacelle
- Computation of thermally perfect properties of oblique shock waves : under contract NAS1-19000
- Computation of three-dimensional compressible boundary-layers to fourth-order accuracy on wings and fuselages
- Computation of turbulent boundary layers employing the defect wall-function method
- Computation of turbulent boundary layers flows with an algbraic stress turbulence model [microform]
- Computation of viscous flow in curved ducts and comparison with experimental data
- Computation of viscous incompressible flows
- Computational Fluid Dynamics (CFD) analysis for the reduction of impeller discharge flow distortion
- Computational Fluid Dynamics (CFD) simulations of jet mixing in tanks of different scales
- Computational aeroacoustics and numerical simulation of supersonic jets : final report on NASA grant NAG 1-1479
- Computational aerodynamic simulations of a 1484 ft/sec tip speed quiet high-speed fan system model for acoustic methods assessment and development
- Computational aerodynamic simulations of a spacecraft cabin ventilation fan design
- Computational aerodynamic simulations of an 840 ft/sec tip speed advanced ducted propulsor fan system model for acoustic methods assessment and development
- Computational aerodynamics and supercomputers
- Computational aeroheating predictions for X-34
- Computational aeroheating predictions for X-34
- Computational aeroservoelastic analysis with an Euler-based unsteady flow solver : NASA-Ames university consortium cooperative agreement no. NCC2-5105, final research summary for the period: 1 November 1994 - 31 January 1997
- Computational analyses of propulsion aeroacoustics for mixed flow nozzle pylon installation at takeoff
- Computational analysis of a low-boom supersonic inlet
- Computational analysis of the SSME fuel preburner flow : final report
- Computational analysis of the combustion process in an axisymmetric RBCC flowpath
- Computational analysis of the combustion process in an axisymmetric,RBCC flowpath
- Computational aspects of zonal algorithms for solving the compressible Navier-Stokes equations in three dimensions
- Computational assessment of the aerodynamic performance of a variable-speed power turbine for large civil tilt-rotor application
- Computational fluid dynamics
- Computational fluid dynamics and aerothermodynamics : semiannual progress report, January 1987--June 1987
- Computational fluid dynamics and areothermodynamics : final report, January 1987--December 1988
- Computational fluid dynamics at NASA Ames and the numerical aerodynamic simulation program
- Computational fluid dynamics research in three-dimensional zonal techniques : final technical report on NAG-1-866
- Computational fluid dynamics study of the variable-pitch split-blade fan concept
- Computational fluid dynamics uses in fluid dynamics/aerodynamics education
- Computational fluid mechanics utilizing the variational principle of modeling damping seals : final report
- Computational investigation of flap-edges : final report, NASA award NCC-2-857
- Computational investigation of novel tip leakage mitigation methods for high pressure turbine blades
- Computational investigation of tangential slot blowing on a generic chined forebody
- Computational methods for HSCT-inlet controls/CFD interdisciplinary research
- Computational methods for the problems of the tip vortex : final technical report
- Computational modeling and validation for hypersonic inlets
- Computational modeling of jet induced mixing of cryogenic propellants in low-G
- Computational pollutant environment assessment from propulsion-system testing
- Computational simulations of convergent nozzles for the AIAA 1st Propulsion Aerodynamics Workshop
- Computational strategies for three-dimensional flow simulations on distributed computer systems : final report
- Computational strategies for three-dimensional flow simulations on distributed computer systems : final report for NASA grant NAG 2-869
- Computational study of flow establishment in a ram accelerator
- Computational study of flow establishment in hypersonic pulse facilities
- Computational study of generic hypersonic vehicle flow field
- Computational study of near-limit propagation of detonation in hydrogen-air mixtures
- Computational study of separating flow in a planar subsonic diffuser
- Computational study of surface tension and wall adhesion effects on an oil film flow underneath an air boundary layer
- Computational study of the CC3 impeller and vaneless diffuser experiment
- Computational support of the lamimar supersonic wind tunnel, CNSFV code development, Maglev, and grid generation
- Computational test cases for a clipped delta wing with pitching and trailing-edge control surface oscillations
- Computational test cases for a rectangular supercritical wing undergoing pitching oscillations
- Computational work to support FAP/SRW variable-speed power-turbine development
- Computational/experimental aeroheating predictions for X-33 phase II vehicle
- Computations of complex three-dimensional turbulent free jets
- Computations of unsteady viscous compressible flows using adaptive mesh refinement in curvilinear body-fitted grid systems
- Computations of viscous flows in complex geometries using multiblock grid systems
- Computer Aided Grid Interface : an interactive CFD pre-processor, final report, (performance period--16 May 1991-15 May 1996)
- Computer program BL2D for solving two-dimensional and axisymmetric boundary layers
- Computer simulation of aircraft aerodynamics