#
Finite element method
Resource Information
The concept ** Finite element method** represents the subject, aboutness, idea or notion of resources found in **Houston Public Library**.

The Resource
Finite element method
Resource Information

The concept

**Finite element method**represents the subject, aboutness, idea or notion of resources found in**Houston Public Library**.- Label
- Finite element method

- Source
- nasat

## Context

Context of Finite element method#### Subject of

- 3-D inelastic analysis methods for hot section components : fourth annual status report for the period February 14, 1986 to February 14, 1987, Volume I, Special finite element models
- 58th Shock and Vibration Symposium
- A 3-D magnetic analysis of a Stirling convertor linear alternator under load
- A CFD/CSD interaction methodology for aircraft wings : a dissertation ...
- A Finite element-boundary integral method for cavities in a circular cylinder
- A Taylor-Galerkin finite element algorithm for transient nonlinear thermal-structural analysis
- A Taylor-Galerkin finite element algorithm for transient nonlinear thermal-structural analysis : progress report for the period January 1, to June 1, 1985
- A constitutive law for finite element contact problems with unclassical friction
- A coupled/uncoupled deformation and fatigue damage algorithm utilizing the finite element method
- A coupled/upcoupled computational scheme for deformation and fatique damage analysis of unidirectional metal-matrix composites
- A decentralized linear quadratic control design method for flexible structures : interim report
- A discourse on sensitivity analysis for discretely-modeled structures
- A finite element approach for the dynamic analysis of joint-dominated structures
- A finite element procedure for calculating fluid-structure interaction using MSC/NASTRAN
- A finite element propagation model for extracting normal incidence impedance in nonprogressive acoustic wave fields
- A finite element-boundary integral formulation for scattering by three-dimensional cavity-backed apertures
- A finite element-boundary integral method for electromagnetic scattering
- A general interface method for aeroelastic analysis of aircraft
- A generic interface element for COMET-AR : contracts NAS1-19000 and NAS1-19700
- A least-squares finite element method for electromagnetic scattering problems
- A least-squares finite element method for incompressible Navier-Stokes problems
- A life comparison of tube and channel cooling passages for thrust chambers
- A life prediction model for laminated composite structural components : final technical report
- A method for thermal analysis of spiral bevel gears
- A methodology for exploiting parallelism in the finite element process
- A mixed multi-field finite element formulation for thermopiezoelectric composite shells
- A multiscale progressive failure modeling methodology for composites that includes fiber strength stochastics
- A multiscale, nonlinear, modeling framework enabling the design and analysis of composite materials and structures
- A new finite element approach for prediction of aerothermal loads--progress in inviscid flow computations
- A new implementation of the Programming System for Structural Synthesis (PROSSS-2)
- A new technique for simulating composite material : final report
- A novel approach in formulation of special transition elements : mesh interface elements : status report
- A novel shape parameterization approach
- A posteriori finite element bounds for sensitivity derivatives of partial-differential-equation outputs
- A probabilistic approach to model update
- A procedure for 3-D contact stress analysis of spiral bevel gears
- A refined shear deformation theory for the analysis of laminated plates
- A review of the analytical simulation of aircraft crash dynamics
- A simplified method for elastic-plastic-creep structural analysis
- A spline-based parameter estimation technique for static models of elastic structures
- A strategy for integrating a large finite element model using MSC NASTRAN/PATRAN : X-33 lessons learned
- A study of facilities and fixtures for testing of a high speed civil transport wing component
- A study of failure in small pressurized cylindrical shells containing a crack
- A study of methods to predict and measure the transmission of sound through the walls of light aircraft : semi-annual status report, reporting period 10/1/85 - 5/15/86
- A study of methods to predict and measure the transmission of sound through the walls of light aircraft : semi-annual status report, reporting period 5/15/86 - 11/15/86
- A study on strength evaluations of EDNi/EDCu/NARloy-Z bonded joints
- A study on the sensitivity and simultaneous adjustment of a hoop-column antenna surface
- A survey of mixed finite element methods : final report
- A survey of parametrized variational principles and application to computational mechanics
- A survey of the core-congruential formulation for geometrically nonlinear TL finite elements
- A test for characterizing delamination migration in carbon/epoxy tape laminates
- A thermostructural analysis of a diboride composite leading edge
- A thermostructural analysis of a diboride composite leading edge
- A three-dimensional finite-element thermal/mechanical analytical technique for high-performance traveling wave tubes
- A three-dimensional nonlinear timoshenko beam based on the corecongruential formulation
- A transient FETI methodology for large-scale parallel implicit computations in structural mechanics
- A transient FETI methodology for large-scale parallel implicit computations in structural mechanics : progress report, part II
- A two dimensional interface element for coupling of independently modeled three dimensional finite element meshes and extensions to dynamic and non-linear regimes : performance report (summary report)
- A two-layer multiple-time-scale turbulence model and grid independence study
- A user's manual and tutorial for performing COMET structural analyses using an advanced user-friendly interface
- A verification procedure for MSC/NASTRAN finite element models
- A weak Hamiltonian finite element method for optimal control problems
- ACT payload shroud structural concept analysis and optimization
- ANISAP, a three dimensional finite element program for laminated composites subjected to mechanical loading
- ANSYS duplicate finite-element checker routine
- ASTROP2 users manual : a program for aeroelastic stability analysis of propfans
- ASTROP2 users manual : a program for aeroelastic stability analysis of propfans
- Accurate interlaminar stress recovery from finite element analysis
- Acoustic scattering from ellipses by the modal element method
- Adaptive finite element methods for continuum damage modeling
- Adaptive shape functions and internal mesh adaptation for modelling progressive failure in adhesively bonded joints
- Addendum to structural arrangement trade study : reusable hydrogen composite tank system (RHCTS) and graphite composite primary structures (GCPS)
- Advanced analysis technique for the evaluation of linear alternators and linear motors
- Advanced composites structural concepts and materials technologies for primary aircraft structures : structural response and failure analysis
- Advanced composites structural concepts and materials technologies for primary aircraft structures : structural response and failure analysis : ISPAN modules users manual
- Advanced stress analysis methods applicable to turbine engine structures : final report of research grant NAG-3-33
- Advances in fatigue and fracture mechanics analyses for metallic aircraft structures
- Aeroelastic analysis of aircraft : wing and wing/fuselage configurations
- Aeroelasticity and structural optimization of composite helicopter rotor blades with swept tips
- Aircraft structural mass property prediction using conceptual-level structural analysis
- Algebraic turbulence modeling for unstructured and adaptive meshes
- An AWE implementation for electromagnetic analysis
- An analysis of cross-coupling of a multi component jet engine test stand using finite element modeling techniques : final report
- An analysis of spectral envelope-reduction via quadratic assignment problems
- An arbitrary grid CFD algorithm for configuration aerodynamics analysis, Vol.1, Theory and validations
- An arbitrary grid CFD algorithm for configuration aerodynamics analysis, Vol.2, FEMNAS user guide
- An aspect ratio bound for triangulating a d-grid cut by a hyperplane
- An assessment on finite-element modeling techniques for thick-solid/thin-shell joints analysis
- An augmented Young-Laplace model of an evaporating meniscus in a micro-channel with high heat flux
- An evaluation of a coupled microstructural approach for the analysis of functionally graded composites via the finite-element method
- An evaluation of the Iosipescu specimen for composite materials shear property measurement
- An experimental investigation of transverse tension fatigue characterization of IM6/3501-6 composite materials using a three-point bend test : contract NAG1-1773
- An integrated magnetic circuit model and finite element model approach to magnetic bearing design
- Analyses of quasi-isotropic composite plates under quasi-static piijnt loads simulating low-velicity impact phenomena
- Analysis and testing of plates with piezoelectric sensors and actuators
- Analysis for thermo-chemical decomposition of composite structures : final report
- Analysis of boundary conditions for SSME subsonic internal viscous flow analysis
- Analysis of corner cracks at hole by a 3-D weight function method with stresses from finite element method
- Analysis of cylindrical wrap-around and doubly conformal patch antennas via the finite element-artificial absorber method
- Analysis of elliptically polarized cavity backed antennas using a combined FEM/MoM/GTD technique
- Analysis of new composite architectures : (final report NAG3-1270)
- Analysis of random structure-acoustic interaction problems using coupled boundary element and finite element methods
- Analysis of selected compression splice joint locations in a graphite-epoxy transport wing stub box
- Analysis of surface cracks at hole by a 3-D weight function method with stresses from finite element method
- Analysis of the STS-126 flow control valve structural-acoustic coupling failure
- Analysis of the transient behavior of rubbing components : final report
- Analysis of thick sandwich shells with embedded ceramic tiles
- Analysis of three-dimensional-cavity-backed aperture antennas using a combined finite element method/method of moments/geometrical theory of diffraction technique
- Analysis of waveguide junction discontinuities using finite element method : contract NAS1-19341
- Analysis supporting MSFC cryostat testing unit : final report
- Analytic and computational perspectives of multi-scale theory for homogeneous, laminated composite, and sandwich beams and plates
- Analytical and experimental investigation of rubbing interaction in labryinth seals for a liquid hydrogen fuel pump
- Analytical and experimental study of vibrations in a gear transmission
- Analytical prediction of aerothermal environment in a wing-elevon cove
- Anomalous buckling characteristics of laminated metal-matrix composite plates with central square holes
- Application of AWE along with a combined FEM/MoM technique to compute RCS of a cavity-backed aperture in an infinite ground plane over a frequency range
- Application of FEM to estimate complex permittivity of dielectric material at microwave frequency using waveguide measurements
- Application of benchmark examples to assess the single and mixed-mode static delamination propagation capabilities in ANSYSÂ®
- Application of composite mechanics to composites enhanced concrete structures
- Application of finite-element-based solution technologies for viscoplastic structural analyses
- Application of higher harmonic control to hingeless rotor systems
- Application of interface technology in nonlinear analysis of a stitched/RFI composite wing stub box
- Application of mathematical optimization procedures to a structural model of a large finite-element wing
- Application of model based parameter estimation for fast frequency response calculations of input characteristics of cavity-backed aperture antennas using hybrid FEM/MoM technique
- Applications of parallel computation in micro-mechanics and finite element method : final report ... time period: October 1, 1993 to May 31, 1996
- Buckling and damage resistance of transversely-loaded composite shells
- Buckling testing and analysis of honeycomb sandwich panel arc segments of a full-scale fairing barrel
- Bucky instruction manual
- Burst testing of a superalloy disk with a dual grain structure
- Burst testing of a superalloy disk with a dual grain structure
- CARES/LIFE Ceramics Analysis and Reliability Evaluation of Structures Life Prediction Program
- CARES/LIFE Ceramics Analysis and Reliability Evaluation of Structures Life Prediction Program
- CFD code evaluation : semiannual report (April 1988 - September 1988)
- COMGEN, a computer program for generating finite element models of composite materials at the micro level
- CSTEM user manual
- Calculations of diffuser flows with an anisotropic K-[epsilon] model
- Center for Computational Structures Technology : semi-annual report
- Ceramic material life prediction : a program to translate ANSYS results to CARES/LIFE reliability analysis : final report
- Combined effect of matrix cracking and stress-free edge on delamination
- Combining comparison functions and finite element approximations in CFD
- Comparative efficiency of finite, boundary, and hybrid element methods in elastostatics
- Comparison of experimental and analytical tooth bending stress of aerospace spiral bevel gears
- Comparison of gap elements and contact algorithm for 3D contact analysis of spiral bevel gears
- Comparison of symbolic and numerical integration methods for an assumed-stress hybrid shell element
- Compatibility conditions of structural mechanics
- Component mode synthesis and large deflection vibration of complex structures : final report for the period ended January 31, 1987
- Compression response of a sandwich fuselage keel panel with and without damage
- Compression response of a sandwich fuselage keel panel with and without damage
- Computation of loads on the McDonnell Douglas advanced bearingless rotor
- Computation of noise radiation from turbofans : a parametric study
- Computational aeroservoelastic analysis with an Euler-based unsteady flow solver : NASA-Ames university consortium cooperative agreement no. NCC2-5105, final research summary for the period: 1 November 1994 - 31 January 1997
- Computational methods and software systems for dynamics and control of large space structures : final report on grant NAG1-756
- Computational methods for the control of distributed parameter systems
- Computational simulation of structural fracture in fiber composites
- Computational study of a McDonnell Douglas single-stage-to-orbit vehicle concept for aerodynamic analysis
- Computer simulation of gear tooth manufacturing processes
- Conjugate heat transfer analyses on the manifold for ramjet fuel injectors
- Constitutive modeling for isotropic materials (HOST)
- Constitutive modeling of the facesheet to core interface in honeycomb sandwich panels subject to mode I delamination
- Control-volume mixed finite element methods
- Controller design via structural reduced modeling by FETM : a semi annual report
- Controller design via structural reduced modeling by FETM : final report
- Correlation of finite element free vibration predictions using random vibration test data
- Correlation of structural analysis and test results for the McDonnell Douglas stitched/RFI all-composite wing stub box
- Correlation of structural analysis and test results for the McDonnell Douglas stitched/RFI all-composite wing stub box
- Coupled mixed-field laminate theory and finite element for smart piezolectric composite shell structures
- Coupled structural, thermal, phase-change and electromagnetic analysis for superconductors, Volume I
- Crack driving forces in a multilayered coating system for ceramic matrix composite substrates
- Crashworthy evaluation of a 1/5-scale model composite fuselage concept
- Cross-surface interface element for coupling built-up structural subdomains
- Cyclic creep analysis from elastic finite-element solutions
- DAC-3 pointing stability analysis results for SAGE III and other users of the International Space Station (ISS) Payload Attachment Sites (PAS)
- DAC-3 pointing stability analysis results for SAGE III and other users of the International Space Station (ISS) Payload Attachment Sites (PAS)
- DYCAST, a finite element program for the crash analysis of structures
- Data driven model development for the supersonic semispan transport (S4T)
- Deformation analysis of rotary combustion engine housings : final report on NASA grant NAG 3-456
- Delamination growth in composite materials
- Delamination micromechanics analysis
- Design evaluation using finite element analysis of cooled silicon nitride plates for a turbine blade application
- Design evaluation using finite element analysis of cooled silicon nitride plates for a turbine blade application
- Design of software for design of finite element for structural analysis
- Design sensitivity analysis using EAL, Part I, Conventional design parameters
- Design, generation and tooth contact analysis (TCA) of asymmetric face gear drive with modified geometry
- Design, optimization and evaluation of integrally stiffened Al 7050 panel with curved stiffeners
- Design, optimization, and evaluation of A1-2139 compression panel with integral T-stiffeners
- Development and application of a technique for reducing airframe finite element models for dynamics analysis
- Development and application of benchmark examples for mixed-mode I/II quasi-static delamination propagation predictions
- Development and calibration of a system-integrated rotorcraft finite element model for impact scenarios
- Development of a benchmark example for delamination fatigue growth prediction
- Development of a simplified procedure for rocket engine thrust chamber life prediction with creep : final report
- Development of advanced Navier-Stokes solver
- Development of advanced methods of structural and trajectory analysis for transport aircraft : annual report : October 1, 1995 - September 30, 1996
- Development of an adaptive hp-version finite element method for computational optimal control : final report, NASA grant NAG-1-1435, Apr. 22, 1992 - Nov. 30, 1994
- Development of an experimental space station model for structural dynamics research
- Development of methods for predicting large crack growth in elastic-plastic work-hardening materials in fully plastic conditions
- Development of multiobjective optimization techniques for sonic boom minimization : final report on NASA Ames grant no. NCC2-5064, performance period--5/16/94-9/15/96
- Development of software to model AXAF-I image quality : final report
- Direct numerical simulation of incompressible pipe flow using a B-spline spectral method
- Direct numerical simulation of incompressible pipe flow using a b-spline spectral method
- Discontinuously stiffened composite panel under compressive loading
- Discrete-layer piezoelectric plate and shell models for active tip-clearance control
- Discretized energy minimization in a waveguide with point sources
- Distributed finite element analysis using a transputer network : final report
- Documentation for a structural optimization procedure developed using the Engineering Analysis Language (EAL)
- Dynamic analysis and design of the SIRTF primary mirror mount : final report
- Dynamic analysis of a two member manipulator arm : NAG1-1997, FRS no. 4-42011, final report
- Dynamic behavior of a magnetic bearing supported jet engine rotor with auxiliary bearings
- Dynamic finite element predictions for Mars sample return cellular impact test #4
- Dynamic response assessment for the MEMS accelerometer under severe shock loads
- Dynamic shape reconstruction of three-dimensional frame structures using the inverse finite element method
- EAC, a program for the error analysis of STAGS results for plates
- Earth Observing System (EOS)/Advanced Microwave Sounding Unit-A (AMSU-A), stress analysis report, A1 module : contract no. NAS5-32314
- Effect of crack curvature on stress intensity factors for ASTM standard compact tension specimens
- Effect of hoop stress on ball bearing life prediction
- Effect of rim thickness on gear crack propagation path
- Effects of rim thinkness on spur gear bending stress
- Elastic plastic fracture mechanics methodology for surface cracks : semiannual report
- Elastic response of (001)-oriented PWA 1480 single crystal : the influence of secondary orientation
- Elastic-plastic J-integral solutions for surface cracks in tension using an interpolation methodology
- Electromagnetic scattering analysis of arbitrarily shaped material cylinder by FEM-BEM method
- Electromagnetic scattering from realistic targets : final report for NASA NAG 3-1474
- Element load data processor (ELDAP) user's manual
- Elevated temperature crack growth : annual report
- Elevated temperature crack growth : annual report
- Enhanced accuracy by post-processing for finite element methods for hyperbolic equations
- Entropy stable wall boundary conditions for the compressible Navier-Stokes equations
- Equivalent linearization analysis of geometrically nonlinear random vibrations using commercial finite element codes
- Error estimation and adaptive mesh refinement for parallel analysis of shell structures
- Evaluation of MARC for the analysis of rotating composite blades
- Evaluation of discretization procedures for transition elements in adaptive mesh refinement
- Evaluation of on-line pulse control for vibration suppression in flexible spacecraft
- Evaluation of the Edge Crack Torsion (ECT) test for mode III interlaminar fracture toughness of laminated composites
- Examples of finite element mesh generation using SDRC IDEAS
- Exhibit D modular design attitude control system study : progress report
- Experiences with a preliminary NICE/SPAR structural analysis system
- Experimental and analytical characterization of the macromechanical response for triaxial braided composite materials
- Experimental verification of a model of a two-link flexible, lightweight manipulator : a thesis presented to the Faculty of Division of Graduate Studies
- Experimental verification of a progressive damage model for IM7/5260 laminates subjected to tension-tension fatigue
- Explicit and implicit compact high-resolution shock-capturing methods for multidimensional Euler equations I, formulation
- Exploiting symmetries in the modeling and analysis of tires
- Extension of Ko straight-beam displacement theory to deformed shape predictions of slender curved structures
- Extracting damping ratio from dynamic data and numerical solutions
- FPCAS3D user's guide : full potential aeroelastic program
- Failure analysis of 2-D and 3-D woven composites : final report, NASA grant NAG-1-1324, September 1, 1991-December 31, 1994
- Fan noise prediction assessment
- Fan noise prediction system development : source/radiation field coupling and workstation conversion for the acoustic radiation code
- Fatigue life methodology for bonded composite skin/stringer configurations
- Fatigue life methodology for tapered composite flexbeam laminates
- Fiber pushout test : a three-dimensional finite element computational simulation
- Fifteenth NASTRAN Users' Colloquium : proceedings of a colloquium held in Kansas City, Missouri, May 4-8, 1987
- Final report for SRB combustion dynamics analysis computer program (CDA-1)
- Final report on adaptive computational methods for SSME internal flow analysis
- Final report on numerical study of magnetic damping during unidirectional solidification (NASA grant #: NCC3-435), duration: October 1, 1995 - September 30, 1997
- Final report on the design, analysis and test verification of advanced encapsulated systems for period ending 31 October 1985
- Final technical report for aeroelastic analysis of propulsion systems : NASA grant number NAG3-1068 : grant duration, August 16, 1989 to December 9, 1993
- Final technical report for development and application of viscoplastic models in nonlinear structural analysis : NASA grant number, NCC3-120 : grant duration, December 5, 1998 to December 1, 1994
- Final technical report for the development of computational techniques for the nonlinear analysis of composite structures at high temperature : NASA grant number, NCC3-248, grant duration, January 13, 1992 to March 1, 1995
- Finite and boundary element modeling of the NASA Langley aluminum testbed cylinder (ATC)
- Finite element analysis and test results comparison for the hybrid wing body center section test article
- Finite element analysis of a NASA National Transonic Facility wind tunnel balance
- Finite element analysis of a NASA National Transonic Facility wind tunnel balance
- Finite element analysis of a composite wheelchair wheel design
- Finite element analysis of end notch flexure specimen
- Finite element analysis of thermal distortion effects on optical performance of solar dynamic concentrator for Space Station Freedom
- Finite element approximation of an optimal control problem for the Von Karman equations
- Finite element composite analysis program (FECAP) for a microcomputer
- Finite element elastic-plastic-creep and cyclic life analysis of a cowl lip
- Finite element method for Eigenvalue problems in electromagnetics
- Finite element methods of analysis for 3d inviscid compressible flows : final report for the period 1 December 1989, 30 November 1990
- Finite element model for failure study of two-dimensional triaxially braided composite
- Finite element modeling and analysis of Mars entry aeroshell concept
- Finite element modeling of frictionally restrained composite interfaces
- Finite element simulation of a space shuttle solid rocket booster aft skirt splashdown using an arbitrary Lagrangian-Eulerian approach
- Finite element simulations of two vertical drop tests of F-28 fuselage sections
- Finite element techniques for the Navier-Stokes equations in the primitive variable formulation and the vorticity stream-function formulation : interim report for the work performed under NASA-Johnson Space Center
- Finite element thermo-viscoplastic analysis of aerospace structures
- Finite-element analysis of a Mach-8 flight test article using nonlinear contact elements
- Finite-element analysis of a Mach-8 flight test article using nonlinear contact elements
- Finite-element vibration analysis and modal testing of graphite epoxy tubes and correlation between the data
- Flow/damage surfaces for fiber-reinforced metals having different periodic microstructures
- Flow/damage surfaces for fiber-reinforced metals having different periodic microstructures
- Fluids and combustion facility : fluids integrated rack modal model correlation
- Formulation of an improved smeared stiffener theory for buckling analysis of grid-stiffened composite panels
- Fourier analysis of finite element preconditioned collocation schemes
- Fracture analysis of stiffened panels under biaxial loading with widespread cracking
- Fracture mechanics analysis for various fiber/matrix interface loadings
- Free vibration and dynamic response analysis of spinning structures : final report
- Free vibrations of thin-walled semicircular graphite epoxy composite frames
- Free-edge delamination : laminate width and loading conditions effects
- Free-suspension residual flexibility testing of space station Pathfinder : comparison to fixed-base results
- Full-field reconstruction of structural deformations and loads from measured strain data on a wing test article using the inverse finite element method
- Full-scale direct numerical simulation of two- and three-dimensional instabilities and rivulet formation in heated falling films
- Functionally graded adhesives for composite joints
- Further development of Ko displacement theory for deformed shape predictions of nonuniform aerospace structures
- General rotorcraft aeromechanical stability program (GRASP) theory manual
- Geometrical modelling of textile reinforcements : final technical report
- Global-local finite element analysis for thermo-mechanical stresses in bonded joints : grant NAG1-1686
- Guidelines for VCCT-based interlaminar fatigue and progressive failure finite element analysis
- Guidelines for proof test analysis
- HPFTP flow diverter analysis : monthly progress report
- Hierarchic plate and shell models based on p-extension
- Hierarchic plate and shell models based on p-extension
- High-performance equation solvers and their impact on finite element analysis
- Higher harmonic control analysis for vibration reduction of helicopter rotor systems
- Highly accurate beam torsion solutions using the p-Version finite element method
- ICAN/PART, particulate composite analyzer, user's manual and verification studies
- Impact and penetration of thin aluminum 2024 flat panels at oblique angles of incidence
- Impact resistance of fiber composites : energy absorbing mechanisms and environmental effects
- Impact testing and simulation of composite airframe structures
- Impact testing of composites for aircraft engine fan cases
- Implementation of J-A methodology elastic-plastic crack instability analysis capability into the WARP-3D code
- Implementation of free-formulation-based flat shell elements into NASA comet code and development of nonlinear shallow shell element : grant NAG1-1626
- Improved assumed-stress hybrid shell element with drilling degrees of freedom for linear stress, buckling and free vibration analyses
- Improved finite element modeling of the turbofan engine inlet radiation problem
- Improved subcell model for the prediction of braided composite response
- Incorporation of failure into an orthotropic three-dimensional model with tabulated input suitable for use in composite impact problems
- Inelastic strain analysis of solder joint in NASA fatigue specimen : final report
- Influence of finite element software on energy release rates computed using the virtual crack closure technique
- Influence of shear stiffness degradation on crack paths in uni-directional composite laminates
- Integrated Advanced Microwave Sounding Unit-A (AMSU-A) : METOP stress analysis report (qual level random vibration), A1 module : contract no. NAS 5-32314
- Interlaminar fracture toughness : three-dimensional finite-element modeling for end-notch and mixed-mode flexure
- Investigation of difficult component effects on finite element model vibration prediction for the Bell AH-1G helicopter
- Investigation of effects of material architecture on the elastic response of a woven ceramic matrix composite
- Investigation of finite element-ABC methods for electromagnetic field simulation
- Joint research effort on vibrations of twisted plates : phase 1, final results
- LOOPREF : a fluid code for the simulation of coronal loops : contract NAS5-32350
- Langley's CSI evolutionary model : phase II
- Large Civil Tiltrotor (LCTR2) interior noise predictions due to turbulent boundary layer excitation
- Large angle transient dynamics (LATDYN) : demonstration problem manual
- Large angle transient dynamics (LATDYN) : user's manual
- Large-deformation displacement transfer functions for shape predictions of highly flexible slender aerospace structures
- Lattice truss structural response using energy methods
- Layerwise finite elements for smart piezoceramic composite plates in thermal environments
- Layerwise finite elements for smart piezoceramic composite plates in thermal environments
- Least squares finite element simulation of transonic flows
- Linear and nonlinear dynamic analysis of redundant load path bearingless rotor systems
- Local strain redistribution corrections for a simplified inelastic analysis procedure based on an elastic finite-element analysis
- Local strain redistribution corrections for a simplified inelastic analysis procedure based on an elastic finite-element analysis
- MHOST, version 4.2
- Macro scale independently homogenized subcells for modeling braided composites
- Manual for automatic generation of finite element models of spiral bevel gears in mesh
- Material characterization and geometric segmentation of a composite structure using microfocus x-ray computed tomography image-based finite element modeling
- Materials with periodic internal structure : computation based on homogenization and comparison with experiment
- Mathematical aspects of finite element methods for incompressible viscous flows
- Measuring crack length in coarse grain ceramics
- Mechanical testing program for thermal barrier coating development : NASA Lewis Research Center, cooperative agreement NCC3-187, final report
- Mechanical- and thermal-buckling behavior of rectangular plates with different central cutouts
- Meshing of a spiral bevel gearset with 3D finite element analysis
- Metal matrix composites microfracture : computational simulation
- Method for estimating operational loads on aerospace structures using span-wisely distributed surface strains
- Methodology for predicting the onset of widespread fatigue damage in lap-splice joints
- Methodology for predicting the onset of widespread fatigue damage in lap-splice joints
- Methods for assessing honeycomb sandwich panel wrinkling failures
- Microfracture in high temperature metal matrix crossply laminates
- Microgravity emissions laboratory testing of the light microscopy module control box fan
- Micromechanical models for textile structural composites
- Micromechanics analysis of space simulated thermal deformations and stresses in continuous fiber reinforced composites
- Minimization of the vibration energy of thin-plate structures and the application to the reduction of gearbox vibration
- Minimum weight design of a generic axisymmetric inlet
- Minimum weight design of a generic axisymmetric inlet
- Modal analysis of UH-60A instrumented rotor blades
- Modal ring method for the scattering of sound
- Modeled and measured dynamics of a composite beam with periodically varying form core
- Modeling and analysis of composite wing sections for improved aeroelastic and vibration characteristics using smart materials
- Modeling of structural-acoustic interaction using coupled FE/BE method and control of interior acoustic pressure using piezoelectric actuators : final report for the period ending August, 1997 under research grant NAG1-1684
- Modeling of thermal barrier coatings : final report
- Modeling of transient heat pipe operation : semiannual status report
- Modeling progressive damage using local displacement discontinuities within the FEAMAC multiscale modeling framework
- Modeling progressive failure of bonded joints using a single joint finite element
- Modification of a macromechanical finite-element based model for impact analysis of triaxially-braided composites
- Multi-criterion preliminary design of a tetrahedral truss platform
- Multidisciplinary approach to aerospike nozzle design
- Multidisciplinary approach to aerospike nozzle design
- NASA Workshop on Computational Structural Mechanics 1987 : proceedings of a workshop
- NASA Workshop on Distributed Parameter Modeling and Control of Flexible Aerospace Systems : proceedings of a workshop sponsored by tne National Aeronautics and Space Administration, Washington, D.C. and held in Williamsburg, Virginia, June 8-10, 1992
- NESSUS/NASTRAN interface : final report, NASA contract NAS8-39797, SwRI project 06-7212
- Neotectonics of Asia : thin-shell finite-element models with faults
- Non-linear dynamic analysis of geared systems, Part II, final report
- Non-linear finite element modeling of THUNDER piezoelectric actuators
- Non-linear finite element modeling of THUNDER piezoelectric actuators
- Non-linear numerical analysis of the Iosipescu specimen for composite materials
- Nonconforming mortar element methods : application to spectral discretizations
- Nondestructive analysis and development : final report
- Nonlinear analysis for high-temperature multilayered fiber composite structures
- Nonlinear analysis of the space shuttle superlightweight external fuel tank
- Nonlinear analysis of thin fracture specimens using solid, isoparametric finite elements
- Nonlinear response and residual strength of damaged stiffened shells subjected to combined loads
- Numerical algoriths for finite element computations on concurrent processors : a semi-annual report for the period March 1, 1986 - August 31, 1986
- Numerical implementation of a multiple-ISV thermodynamically-based work potential theory for modeling progressive damage and failure in fiber-reinforced laminates
- Numerical modeling of HgCdTe solidification : effects of phase diagram, double-diffusion convection and microgravity level
- Numerical simulation of heat and mass transport during space crystal growth with MEPHISTO
- Numerical simulation of the nonlinear response of composite plates under combined thermal and acoustic loading : final report, for the period ended March 15, 1995
- Numerical techniques in acoustics : extended abstracts of papers to be presented at American Society of Mechanical Engineers Winter Annual Meeting, Miami, Florida, November 17-21, 1985
- On finite element implementation and computational techniques for constitutive modelling of high temperature composites
- On hybrid and mixed finite element methods
- On the accuracy of least squares methods in the presence of corner singularities
- On the finite element implementation of the generalized method of cells micromechanics constitutive model
- On-orbit application of H-infinity to the middeck active controls experiment : overview of results
- On-orbit application of H-infinity to the middeck active controls experiment : overview of results
- Optimal guidance law development for an advanced launch system : interim progress report
- Optimal guidance law development for an advanced launch system : interim progress report, 1 December 1990 - 15 June 1991
- Oscillating flow and heat transfer in a channel with sudden cross section change : final report
- Parallel Newton-Krylov-Schwarz algorithms for the transonic full potential equation : NASA contract no. NAS1-19480
- Parallel aeroelastic computations for wing and wing-body configurations : annual report for the period of time July 1993-July 1994
- Parallel computation of the Jacobian matrix for nonlinear equation solvers using MATLAB
- Parallel processing for nonlinear dynamics simulations of structures including rotating bladed-disk assemblies : report to NASA Lewis Research Center
- Parallel software support for computational structural mechanics : semiannual report, period covered, 12-1-86 through 5-31-87
- Parametric structural model for a Mars entry concept
- Passively damped laminated piezoelectric shell structures with integrated electric networks
- Permanent magnetic bearing for spacecraft applications
- Piezoelectric vibration damping study for rotating composite fan blades
- Plan, execute, and discuss vibration measurements and correlations to evaluate an NASTRAN finite element model of the AH-64 helicopter airframe
- Plan, formulate and discuss a NASTRAN finite element model of the AH-64A helicopter airframe
- Power flow as a complement to statistical energy analysis and finite element analysis : first semi-annual report, grant no. NAG-1-685
- Preconditioned mixed spectral element methods for elasticity and stokes problems
- Prediction of contact path and load sharing in spiral bevel gears
- Predictions of thermal buckling strengths of hypersonic aircraft sandwich panels using minimum potential energy and finite element methods
- Preliminary in-flight loads analysis of in-line launch vehicles using the VLOADS 1.4 program
- Preliminary investigation of stability of a fin-stiffened slender strut
- Probabilistic Structural Analysis Methods (PSAM) for select space propulsion system components
- Probabilistic assessment of National Wind Tunnel
- Probabilistic assessment of National Wind Tunnel
- Probabilistic finite elements for fatigue and fracture analysis
- Probabilistic methods for structural reliability and risk
- Probabilistic simulation of stress concentation in composite laminates
- Procedure for imolementation of temperature-dependent mechanical property capability in the Engineering Analysis Language (EAL) system
- Progressive Damage Analysis of Laminated Composite (PDALC)--a computational model implemented in the NASA COMET finite element code
- Progressive damage analysis of laminated composite (PDALC) : (a computational model implemented in the NASA COMET finite element code) version 2.0
- Progressive failure of a unidirectional fiber-reinforced composite using the method of cells : discretization objective computational results
- Progressive fracture of fiber composite build-up structures
- Progressive fracture of fiber composite thin shell structures under internal pressure and axial loads
- Progressive fracture of fiber composite thin shell structures under internal pressure and axial loads
- Quantitative examination of corrosion damage by means of thermal response measurements
- Quasi-static viscoelastic finite element model of an aircraft tire
- Recent advances in hybrid/mixed finite elements
- Recent advances in the analysis of spiral bevel gears
- Recent advances in the analysis of spiral bevel gears
- Reduced uncertainties in the flutter analysis of the aerostructures test wing
- Reliability analysis of single crystal NiAl turbine blades
- Research related to improved computer aided design software package : semi-annual status report, April 1, 1986 - October 1, 1986
- Residual stresses in thermal barrier coatings for a Cu-8Cr-4Nb substrate system
- Residual stresses in thermal barrier coatings for a Cu-8Cr-4Nb substrate system
- Response of composite fuselage sandwich side panels subjected to internal pressure and axial tension
- Response of composite panels with stiffness gradients due to stiffener terminations and cutouts
- Robust hybrid finite element methods for antennas and microwave circuits
- Robust integration schemes for generalized viscoplasticity with internal-state variables, Part I, Theoretical developments and applications
- Robust integration schemes for generalized viscoplasticity with internal-state variables, Part II, Algorithmic developments and implementation
- Rocket thrust chamber thermal barrier coatings : final report
- Rocket thrust chamber thermal barrier coatings : final report
- Rotating shake test and modal analysis of a model helicopter rotor blade
- Runge-Kutta discontinuous Galerkin methods for convection-dominated problems
- SPAR improved structural-fluid dynamic analysis capability : final report
- SPAR improved structural/fluid dynamic analysis capability : final report
- SSME structural dynamic model development : phase II, final report
- STARS : an integrated general-purpose finite element structural, aeroelastic, and aeroservoelastic analysis computer program
- STARS, an integrated, multidisciplinary, finite-element, structural, fluids, aeroelastic, and aeroservoelastic analysis computer program
- STARS, an integrated, multidisciplinary, finite-element, structural, fluids, aeroelastic, and aeroservoelastic analysis computer program
- Sensitivity analysis for aeroacoustic and aeroelastic design of turbomachinery blades : final technical report
- Seventeenth NASTRAN Users' Colloquium : proceedings of a colloquium held in San Antonio, Texas, April 24-28, 1989
- Shape design sensitivity analysis and optimization of three dimensional elastic solids using geometric modeling and automatic regridding
- Shape design sensitivity analysis using domain information
- Shear buckling analysis of a hat-stiffened panel
- Simulation of spiral slot antennas on composite platforms
- Simulation of thin slot spirals and dual circular patch antennas using the finite element method with mixed elements
- Simulation of two-fluid flows by the least-squares finite element method using a continuous surface tension model
- Single axis piezoceramic gimbal
- Some observations on the behavior of the langley model rotor blade
- Space shuttle main engine structural analysis and data reduction/evaluation : final report, Volume 2, High pressure oxidizer turbo-pump turbine and bearing analysis
- Space shuttle production verification motor-1 (PV-1) static fire : final test report, Volume 1
- Space shuttle propellant constitutive law verification tests : final technical report
- Spartan service module finite element modeling technique and analysis
- Specimens and reusable fixturing for testing advanced aeropropulsion materials under in-plane biaxial loading, Part 1, Results of conceptual design study
- Static and dynamic large deflection flexural response of graphite-epoxy beams
- Static stability of the space station solar array FASTMast structure
- Statistical Energy Analysis (SEA) and Energy Finite Element Analysis (EFEA) predictions for a floor-equipped composite cylinder
- Status of structural analysis of 30 cm diameter ion optics
- Strain energy release rate analysis of delamination in a tapered laminate subjected to tension load
- Strain-based damage determination using finite element analysis for structural health management
- Strain-energy-release rate analysis of the end-notched flexure specimen using the finite-element method
- Stress analysis method for clearance-fit joints with bearing-bypass loads
- Stress analysis of B-52 pylon hooks for carrying the X-38 drop test vehicle
- Structural Tailoring of Advanced Turboprops (STAT) : programmer's manual
- Structural analysis of a thermal insulation retainer assembly
- Structural analysis of composite flywheels : an integrated NDE and FEM approach
- Structural and thermal response of 30 cm diameter ion thruster optics
- Structural evaluation of a space main engine (SSME) high pressure fuel turbopump turbine blade
- Structural optimization by generalized, multilevel decomposition
- Structural properties of impact ices accreted on aircraft structures
- Substructure system identification for finite element model updating : final report, NASA grant no. NAG8-1130
- Summary of the modeling and test correlations of a NASTRAN finite element vibrations model for the AH-1G helicopter
- System identification of damped truss-like space structures
- System software for the Finite Element Machine
- Taxiing, take-off, and landing simulation of the high speed civil transport aircraft
- Taxiing, take-off, and landing simulation of the high speed civil transport aircraft
- Test and analysis of composite hat stringer pull-off test specimens
- Test methodology development for experimental structural assessment of ASC planar spring material for long-term durability
- The L1 finite element method for pure convection problems
- The P1-RKDG method for two-dimensional Euler equations of gas dynamics
- The analysis of adhesively bonded advanced composite joints using joint finite elements
- The applicability of the generalized method of cells for analyzing discontinuously reinforced composites
- The buckling response of symmetrically laminated composite plates having a trapezoidal planform area
- The development of directional decohesion finite elements for multiscale failure analysis of metallic polycrystals
- The effect of coatings and liners on heat transfer in a dry shaft-bush tribosystem
- The effect of low velocity impact in the strength characteristics of composite materials laminates : end of the year progress report, NASA grant NAG 1-158
- The individual element test revisited
- The influence of finite-size sources in acousto-ultrasonics
- The influence of gyroscopic forces on the dynamic behavior and flutter of rotating blades
- The influence of lamination angles on the interior noise levels of an aircraft
- The influence of lamination angles on the interior noise levels of an aircraft
- The interpretation of crustal dynamics data in terms of plate interactions and active tectonics of the "Anatolian plate" and surrounding regions in the Middle East : semi-annual report to National Aeronautics and Space Administration (crustal dynamics)
- The merging of fatigue and fracture mechanics concepts : a historical perspective
- The origin of spurious solutions in computational electromagnetics
- The role of damage-softened material behavior in the fracture of composites and adhesives
- The role of multiphysics simulation in multidisciplinary analysis
- The role of multiphysics simulation in multidisciplinary analysis
- The semi-discrete Galerkin finite element modelling of compressible viscous flow past an airfoil : final technical report
- The solution of radiation transport equations with adaptive finite elements
- Theoretical and software considerations for general dynamic analysis using multilevel substructured models
- Theoretical and software considerations for nonlinear dynamic analysis
- Thermal analysis of a metallic wing glove for a Mach-8 boundary-layer experiment
- Thermal and mechanical buckling analysis of hypersonic aircraft hat-stiffened panels with varying face sheet geometry and fiber orientation
- Thermal and mechanical buckling analysis of hypersonic aircraft hat-stiffened panels with varying face sheet geometry and fiber orientation
- Thermal and structural analysis of a hollow core Space Shuttle Main Engine (SSME) turbine blade
- Thermal and structural assessments of a ceramic wafer seal in hypersonic engines
- Thermal behavior of a titanium honeycomb-core sandwich panel
- Thermal behavior of spiral bevel gears
- Thermal structure analyses for CSM testbed (COMET) : final report for the period May 16, 1992 to August 15, 1994
- Thermal-structural finite element analysis using linear flux formulation
- Thermal/structural analysis of the shaft disk region of a fan drive system
- Thermocryogenic buckling and stress analyses of a partially filled cryogenic tank subjected to cylindrical strip heating
- Thermomechanical effects in high-speed seal rubs : final report : covering period from February 26, 1979 to December 31, 1984
- Three-dimensional CTOA and constraint effects during stable tearing in a thin-sheet material
- Three-dimensional elastic-plastic analysis of shallow cracks in single-edge-crack-tension specimens
- Three-dimensional elastic-plastic finite-element analysis of fatigue crack propagation
- Three-dimensional mass conserving elements for compressible flows
- Three-dimensional simulations of Marangoni-Benard convection in small containers by the least-squares finite element method
- TranAir, a full-potential, solution-adaptive, rectangular grid code for predicting subsonic, transonic, and supersonic flows about arbitrary configurations : theory document
- Treatment of singularities in cracked bodies
- Tubine Engine Hot Section Technology 1987 : proceedings of a conference
- Two-dimensional finite element analysis of rectangular panel with hole using NICE/SPAR : progress report for the period ended December 31, 1986
- Two-dimensional nonlinear finite element analysis of CMC microstructures
- Unified control/structure design and modeling research : final report
- Unit cell geometry of multiaxial preforms for structural composites : final report
- User's and test case manual for FEMATS
- User's manual for CBS3DS, version 1.0
- User's manual for FEMOM3DR : version 1.0
- User's manual for FEMOM3DS : version 1.0
- User's manual for GAMNAS--Geometric and material nonlinear analysis of structures
- User-defined material model for progressive failure analysis
- Validation of design and analysis techniques of tailored composite structures
- Variable-complexity multidisciplinary optimization on parallel computers : final report, NAG-1-1562
- Variational approach to probabilistic finite elements : final report to NASA Lewis Research Center, grant no. NAG 3-535, May 1, 1984 to August 31, 1987
- Verification of orthogrid finite element modeling techniques
- Verification of orthogrid finite element modeling techniques
- Vibration transmission through rolling element bearings in geared rotor systems
- Vibrational analysis of engine components using neural-net processing and electronic holography
- Viscoelastic relaxation of topographic highs on Venus to produce coronae
- Welding as science : applying basic engineering principles to the discipline
- Wing shape sensing from measured strain
- ZIP2DL, an elastic-plastic, large-rotation finite-element stress analysis and crack-growth simulation program
- ZIP2DL, an elastic-plastic, large-rotation finite-element stress analysis and crack-growth simulation program
- ZIP3D : an elastic and elastic-plastic finite-element analysis program for cracked bodies
- [Analysis and development of finite element methods for the study of nonlinear thermomechanical behavior of structural components]

## Embed (Experimental)

### Settings

Select options that apply then copy and paste the RDF/HTML data fragment to include in your application

Embed this data in a secure (HTTPS) page:

Layout options:

Include data citation:

<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.houstonlibrary.org/resource/9Nx7ketqSGg/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.houstonlibrary.org/resource/9Nx7ketqSGg/">Finite element method</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.houstonlibrary.org/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.houstonlibrary.org/">Houston Public Library</a></span></span></span></span></div>

Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements

### Preview

## Cite Data - Experimental

### Data Citation of the Concept Finite element method

Copy and paste the following RDF/HTML data fragment to cite this resource

`<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.houstonlibrary.org/resource/9Nx7ketqSGg/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.houstonlibrary.org/resource/9Nx7ketqSGg/">Finite element method</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.houstonlibrary.org/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.houstonlibrary.org/">Houston Public Library</a></span></span></span></span></div>`